Monday, February 18, 2019
General

Download Tecno Camon Cx Official Factory Stock Rom|Firmware

Download Tecno Camon Cx Official Factory Stock Rom|Firmware

The below download link contains the factory stock ron for Tecno Camon CX Air and should not be used in another device to avoid phone crashing/dead unable to boot or connect to a computer and please always make sure your battery percent is up to 40% before flashing/factory reset.

BENEFITS OF STOCK ROMS : 
  • To Unbrick your phone 
  • To Fix the Bootloop problem(phone hangs in boot logo) 
  • You can upgrade your device to a higher Os version or Downgrade your phone to its factory stock rom before update
  • Unroot or Fix Bugs on your phone(this can be caused by some apps or external sd card.
  • Fix the laging problem
  • Solve the soft brick on your smartphone 
  • To revert back to factory stock to regain your warranty.

Tecno Camon CX Air Key Specs:

  • 5.5-inch IPS Display, 720 x 1280 pixels (267ppi)
  • 1.25GHz quad-core Mediatek MT6737 CPU with 2GB RAM
  • Android 7.0 (Nougat) with HiOS 2.0
  • 16GB Storage with support for memory card up to 128GB
  • 13MP Rear Camera and 13MP Front Camera
  • 4G LTE (up to 150Mbps)
  • Fingerprint Sensor (Rear)
  • 3200 mAh Battery with Fast Charging


DOWNLOAD TECNO CAMON CX AIR STOCK ROM

CXAir-H3713A-N-170618V105
[Download Stock Rom|Firmware ##download##]

HOW TO FLASH THIS DEVICE USING SP FLASHTOOL:
  • Open Sp flashtool which has been installed on your pc if you dont have it get it HERE
  • Locate and Click on Scatter-loading option & browse to the scatter file of your Stock ROM. ( the scatter file is always located inside the unzipped stock rom file you downloaded)
  • Select the scatter file which is located in the stock rom downloaded file and load it
  • Select the pattern you would like to use Eg DOWNLOAD ONLY, FORMAT ALL+ DOWNLOAD OR FIRMWARE UPGRADE…. after that click on download 
  • Turn Off your device and connect it to your pc
  •            and wait for the device to complete flashing

  • If you dont understand the procedure above click HERE to get full tutorial with images.

If you experience bootlop(phone hangs in boot logo) navigate to your phones recovery mode and perform a factory reset.

Also Read  Gowin M8+ Stock Rom/firmware Download

Leave a Response